440 100-hand-winch

Hand / Motor Winch with 30 kg Payload

Ergonomic Lifting Gear

 

About

With this new Hand Winch payloads of up to 30 kg can very easily be handled. The two-stage gearbox provides direct drive and a 1:3 reduction. Needless
to say that the gearbox can be shifted even under load. Additional benefit of the gearbox: When heaving weighty loads with active gear reduction you operate the crank handles ergonomically correct, away from the body. The shift gearbox is embedded into the drum core, well protected against dust and water. A ratchet brace avoids accidental unreeling during heaving and a manually operated disc brake cares for a safe deceleration during veering. The electronic counter indicates the length of deployed rope, the remaining rope capacity and the current cable speed. This makes it easy to exactly meet the schedule for e.g. a CTD profile or the recommended descent speed of an Integrating Water Sampler IWS. A high-contrast display clearly shows the data even in direct sunlight.

 

Slip rings

Additionally the core of the drum can accommodate a slip ring device which allows the online use of CTD probes or any other electronic measuring instruments.

The drum capacity of the winch is rated to 300 meters rope, 150 m electro-mechanical five-conductor cable or 200 m electro-mechanical two-conductor cable. The required cable or rope length  has to be chosen from the accessories below for a quote. We only provide a winch together with one of these items.

Motor

The winch can be delivered or retrofitted with an electric motor with speed controller. The motor is simply attached to the winch by means of a bayonet fitting. The 260 W motor is water protected against heavy seas (IP65) and only needs 12 V DC power supply. A simple automotive battery is the perfect power supply. A feedback from the electronic counter to the speed controller allows the user to preset the rope speed at will.

 

Product Description

Features
  • Manual drive with 2 crank handles
  • Two-stage gearbox
  • 5-way slip ring
  • Electronic speed and meter indicator
  • Ergonomic
  • Electric motor with speed controller (optional)

Motor for Hand Winch

Electric motor 260 W / 12 V DC with speed controller,
protected against heavy seas (IP65)

Category:

Five-Conductor Cable

Five-conductor cable, diameter 4.8 mm
PUR-coated vectran fiber cable
Breaking strength 500 daN
With mechanical termination and Subconn connector
Available lengths: 50 / 100 / 150 m

Clear
Category:

DYNEEMA Rope

DYNEEMA rope, diameter 3 mm, with end-eye
Breaking strength 950 daN
Available lengths: 100 / 200 / 300 m

Clear
Category:
TECHNICAL DATA
Payload30 kg
GearShift gearbox 1:1 and 1:3
Drum capacity300 m fiber rope (3 mm dia.)
200 m two-conductor cable (3.7 mm dia.)
150 m five-conductor cable (4.8 mm dia.)
Water protectionIP65, protected against heavy seas
MaterialStainless steel, AISI 316
WeightHand Winch: 15 kg
Electric motor: 7 kg

ORDERING INFORMATION
Products
440 100Hand Winch, manual drive with 2 crank handles
Manual disc brake, manual ratchet brace, adjustable boom
Electronic cable length and speed indicator
With stainless steel mounting device
Without rope / cable
440 101Hand Winch as above, with additional 5-pin slip ring device
Without rope / cable
Accessories
440 103Motor 12 V / 260 W with speed controller for Hand Winch
Protected against heavy seas (IP65)
440 110Five-conductor cable, diameter 4.8 mm
PUR-coated vectran fiber cable
Breaking strength 500 daN
With mechanical termination and Subconn connector
Available lengths: 50 / 100 / 150 m
440 111-200Two-conductor cable, diameter 3.7 mm
PUR-coated vectran fiber cable
Breaking strength 300 daN
With mechanical termination and Subconn connector
Length: 200m
440 202DYNEEMA rope, diameter 3 mm, with end-eye
Breaking strength 950 daN
Available lengths: 100 / 200 / 300 m