444000-hydro-bios-sediment-trap

Sediment Trap acc. to Saarso

Free!

Cylindrical Sedimentation Vessel

 

About

Sediment Traps are containers that allow to quantify sinking particulate matters in aquatic environments. Our tubular design provides a relatively small sampling area but allows suspended matters to settle without the risk of being flushed out even under turbulent environmental conditions (as it happens with large-area conical traps). The Sediment Trap has been designed for autonomous operation in aquatic environments with relatively high vertical particulate flux value. The instrument does not need heavy moorings. Two wide clamps simplify its use in vertical series attached to the same mooring line. Each trap is equipped with a dismountable baffle grid at the opening to reduce turbulences, avoiding wash out of the sediment from the upper part of the cylinder. The water above the collecting bottle can be drained via two cocks. The transparent funnel bottom enables to check for re-suspension of sediment from the collecting bottle after recovery.

Category:

Product Description

Spare Parts

Spare Collecting Bottles

Free!

250 ml with screw cap (1 set of 24 pcs.)

Category:
TECHNICAL DATA
Opening area0.015 m²
Cylinder diameter140 mm
Cylinder length560 mm
Total length900 mm
Diameter to length ratio1 : 4
Cone angle40
Grid dimensions20 x 20 x 40 mm
Mooring line diameter6 mm
MaterialPVC, PE
Weight in air/ water3 kg /1 kg
ORDERING INFORMATION
Products
444 000Sediment Trap (Single bottle version)
Spare Parts
444 150Spare Collecting Bottles 250 ml
with screw cap (1 set of 24 pcs.)